This item is fine for home use. It's sturdy and comes with several attachments. The only reason I didn't give it a five is that the directions for use and assembly are extremely minimal. It took me a while to figure out how to put the bits in and I had to go on line to see what each individual bit is best used for. If you already know that, then you will be happy with it. Update: Be warned, this product is really designed for artificial nails.
Feature Product
- 6 Optional Bits (5 diamond bits, 1 emery rod with 6 sanding bands)
- Variable speed control: 3,000 RPM up to 20,000 RPM
- Voltage: AC 100-120V (US plug)
- Multi use: carving, engraving, routing, grinding, sharpening, sanding, polishing, drilling and so on
- Size: 6.2" INCHES 16cm (L) x 2.4cm (Diameter of handpiece)
Description
How to use:
Plug in the electric cord to the main electric outlet
Select the desired speed by turning the variable speed control knob on the handpiece
To secure the bits: push in the desired bit firmly into the hole
To remove the bits: turn off the machine and gently pull the bit out.
Safety Tips:
Do not use near or place in water. If motor falls into water, unplug immediately.do not reach into water
Do not touch the bit after use. The bit is too hot to be touched by bare hands
Keep dust out of eyes and lungs by using protective eye-wear or a dust mask
Always unplug it after use
When the machine is not in use, all tool must be stored in a dry location and keep away from children.
Always unplug the tool when you change accessory
0 komentar:
Posting Komentar