Rabu, 03 Juli 2019

MISUD Electric Nail Drill - Machine Grinder Polisher Kit for Acrylics Nails Clippers Manicure Pedicure

MISUD Electric Nail Drill - Machine Grinder Polisher Kit for Acrylics Nails Clippers Manicure Pedicure Professional Set Nail Salon with Sanding Bands (Pink)

MISUD Electric Nail Drill - Machine Grinder Polisher Kit for Acrylics Nails Clippers Manicure Pedicure Professional Set Nail Salon with Sanding Bands (Pink)


Get it Now

Feature Product

  • Perfect Nail Set: 1 x Pink Nail Drill,6 x Carbide Drill Bits,6 x Original Sanding Bands
  • Portable:It is very tiny and lightweight,suitable for using at Home,Nail Salon or in Travel.
  • Easy to Operate:easy to change drill bit,adjust speed is very simple.
  • Multi-functions:It usually use at manicure, pedicure, engraving, filing,shape, polish, remove callus,or pets nail beauty and so on.
  • Low Noise and Low Heat: This electro file is with a powerful yet quiet motor. Also, the smart heat dissipation can avoid overheating efficiently. (no more than 20 Minutes of continuous use each time is recommended)

Description

Specification:
Power: single phase, 110V/60Hz, double insulated
PRM: 3000-13000
Collet type: 2.4mm
Color: Pink
Operation:
Step 1: Press shaft lock button, unscrew the collet nut anticlockwise (take out the collet nut).
Step 2: Use one bit to insert the hole and make the bit into the hole. Take it out and re-insert it again for several times because the hole is tight when it is made out from factory.
Step 3:Press shaft lock button and tighten the collet clockwise securely. But avoid excess tightening of the collet nut in case of damage in the nut.
Step 4: connect the cord.
Step 5: When using the product to drill your nail, you can adjust the rotating speed by sliding the speed switch.
Step 6: unscrew the nut and change other bits as you do it in step 1~step 3.

Safety Rules:
1. Always unplug the tool when you change accessory/collet or finish using the machine.
2. Do not engage the shaft lock button while the tool is running.
3. Never use a damaged bit.
4. The machine is not waterproof. Please keep away from water. If the machine falls into water, unplug it immediately and do not touch the water.
5. Do not touch the bit or collet after using it because the bit and collet are too hot to be touched by bare hands.
6. Keep dust out of your eyes and lungs by using a protective eyewear or a dust mask.
7. When not used, tool must be stored in a dry place and kept beyond the reach of children.

Product Features:
This electric nail file can be used for manicuring, pedicuring, removing calluses,beautify pet's nail and so on,suitable for professional nail division or personal manicure/pedicure use, especially in travel.
Low vibration and low noise because of the great bearing.
Speed adjustable and forward reverse switch.
Efficient heat dissipation.

Attention Please:
◆ To extend the machine life, please turn off the main board power when chang



Get it Now

0 komentar:

Posting Komentar