
This fits my 3" CS S&W 686P 7 shot like a glove right out of the box. The Belt Loops are plenty large and rigid enough to support and carry high. I'm 5'9" and 165 lbs; and I can conceal my 7-shot .357 magnum under a normal-fitting t-shirt with minimal printing.
I am happy with this product, but it's not perfect.
+ 686 3" fits well
+ Leather looks very nice
- "squeekier" than a premium leather case, even after some oil is applied
- hard to draw: the tension is established with the stiff leather behind the cylinder, as opposed to a tension screw at the muzzle. You must stretch the leather open with your pointer finger to draw the weapon.
I also bought these magnets to replace the bulky cadence magnet of my Garmin cadence sensor that I have on my race bike (I wanted a cleaner look on my carbon crankset). I have theseLOOK Keo 2 Max Carbon Pedals pedals. They thread through the crank arm using a 6mm hex that fits in on the threaded side of the shaft.
I went at it blind, because the pedal's shaft, where the magnet would be placed, sticks out about 1mm on the inside side of the crank arm. Because the pedal's shaft houses the space for the hex key, the magnet would only have the border of the shaft, or about 2mm as the total amount of metal to which it would attach.
After moving the cadence sensor and the spoke magnet to align with the new position of the magnet, I tried it out by just pedaling the bike on the stand and it registered fine. This morning I went for a ride and it worked beautifully. The magnet did not even shift a bit from where I placed it.
Strictly for esthetic purposes, I may get a washer to place on the space outside of the crank arm where the pedal attaches, to see if the magnet will be a tad more flush with the crank arm. Somehow I don't believe it will be necessary to ensure the magnet stays put.
By the way, the manufacturer advertises 7lbs of pull force. I don't doubt it, but with as little metal for the magnet to attach where I have it placed, it doesn't take 7lbs of pull force to get it off. But, it stays on while the cranks are spinning and that's what matters. And, if it falls off, I have 9 more.
When you see this comment, I am satisfied with this product. The tungsten carbide nail drill set is of good quality, wear-resistant, rust-resistant and durable. It does not block the nails and protect the skin from damage, as described by the seller. As a nail art beginner, I can be very responsible to say that this nail set is very good, five-star praise, definitely worth buying.
The product is very good, the purchase is really worthwhile, the quality is not said, a very high grade product, the tungsten carbide nail drill set is better than expected, made of hard alloy, very Durable, sharp and safe, as a professional manicurist, it can help me save manicure time and the most satisfying shopping.

Feature Product
- Advanced material: Nail drill bits made of hard alloy (20 times stronger than steel), wear-resistant, rust-resistant and durable, it is the hardest material next to the diamond. The professional file bit is strong enough to remove acrylic resin. Less dust, less friction and less heat. Protects the skin from damage due to its superior craftsmanship and rigorously tested design.
- 5 Nail drill bits: 5 different nail drills with a small and cute storage box, beautiful and dustproof. The fluoroscopy design makes it easier to find the products you need, and the professional 3/32" stainless steel shank diameter is suitable for most electric manicure nail nippers on the market.
- Sharp and safe: Effective and save time for your manicure to keep them clean and beautiful. It is environmentally friendly, anti-corrosive and rust-proof, and does not clog nails. The smooth surface is easy to clean with water and alcohol-sterilized, making it safe for nails.
- Multi-function: Carbide nail drill bits are the ideal nail tool, such as engraving, engraving, grinding, milling, sharpening, grinding, polishing, drilling. It is suitable for natural nails and artificial nails. Suitable for any professional manicurist or beginner.
- 100% Satisfied Service:We are committed to providing our customers with a wonderful shopping experience. If you have any questions about the nail drill, please contact our customer service team. We are always at your service.
Description
Our nail drill bits are safe and simple to use.
Our nail set is a safety carbide bit for nail drill,
It is an ideal choice for nail beginners and professionals.
Features:
Material - excellent durability and cutting performance.
Ideal tool - the ideal nail tool for manicure and pedicure.
Unique - unusual, eye-catching appearance for easy identification.
Sharp - it's so convenient, effective and saves time for your manicure.
High quality - it is made of high quality carbide, which is wear-resistant, rust-proof and durable.
Safety - Professionally make nail art to protect your skin from damage.
Mini - it is easy to carry. You can make nail art anytime, anywhere.
Storage box - beautiful and dustproof. Transparent design makes it easy to find the products you need
Specification:
Material: Carbide
Color: silver
Weight: 15 g / piece
Size: medium
Packing: 5 pieces
Style: nail cleaner position / middle cone / thin cone / extra thick cone / coarse sawtooth dome
Drill diameter: 6mm
Drill length: 15mm
Shank diameter: 3/32 inches
Package:
1x nail cleaner position
1x middle cone
1x thin cone
1x extra thick cone
1x coarse sawtooth dome
1x transparent storage box
Note:
1. There may be some error in manual measurement.
2. There may be a slight chromatic aberration due to different shooting angles.
I purchased these magnets to supplement the remaining 4 of a pack of ten similar magnets I had bought years ago, which leads to this point: they are brittle and can break if dropped on a hard surface. I did not discount any stars for this because as magnets go they are so strong for their size and so reasonably priced. I have not tested them to determine exactly how many sheets of paper they will hold firmly to a steel surface, but I do have one which is right now firmly holding a check register (18 sheets including the card stock covers).
Warning: when you receive them you cannot slide them off the stack of ten one at a time: the bond is too strong. I separated them by splitting the stack against a corner of my filing cabinet and repeating this process until I had separated all ten magnets.
I bought this tungsten carbide nail drill set because I like it very much. I want to get it, I am really satisfied with it. The material of the product is hard alloy, no color difference, the right size, as described, very satisfied, and there is a beautiful small box, really like, completely out of expectations, very satisfied with a shopping.
Tungsten carbide nail drill set design is very good, 5 different nail drills, small and cute storage box, beautiful dustproof, overall good, friends who like it, don't miss it, definitely worth a try. Delivery is quick and super satisfied. The seller service is very good. Good product, good seller. Like a friend can buy it.
I ordered these after seeing an online demo of a homopolar motor and then finding that they were very affordable. As far as their viability for the hp motor project, they worked like a champ and I highly recommend trying it. 1/2" diameter is perfect for a AA battery. (I stacked 2 or 3 magnets for my motor experiments) These little magnets are much more powerful than anything this size I've ever played with. They easily influence one another at any distance within a foot and are simply fascinating to play with. The downside: the nickel plating is much thinner than I realized and these little buggers accelerate toward each other with enough force to easily dent and eventually crack each other if you're not very careful. My order came with 20 magnets and I had chipped or broken about 8 of them the first day I got them. These little ones have given me a very healthy respect for the larger ones and I believe all the reviews stating how dangerous those bigger ones are... and I want a couple!
Bought these to replace the magnet from my bike computer that mysteriously disappeared during one of my rides. These things are super strong. When they arrived at my door, I felt a slight shift in the Earth's orbit. For the great price, I chose to get the 10 magnets thinking they would keep disappearing from my bike. I've ridden 400 miles in various harsh conditions with the first magnet and it hasn't budged. Would highly recommend these magnets to anyone looking for strong magnets of this type.

0 komentar:
Posting Komentar